"Midgard” - home of mankind and protected by Thor, God
of thunder, and his hammer. Signalizing the strength ofdiviness and mercy, but at the same time proprietaring the hardware you built in. Combined design and features such as black coated SECC and steel mesh are spotlighting your chassis when your system is built.Furthermore this chassis is supplied with 2 x 120mm pre installed fans (orange blade and black, transparent housings), but another 5 fans can be mounted in different areas for best possible airflow. 5 x 5.25" bays will be able to house all your optical drives, but also 5 trays for your 3.5" and 2.5" HDDs are available so you can feel free by "DIY". Tool free design and a "gorgeous" outlook are only a few points why this chassis is a "must" not only for enthusiast but also for pc beginners. |
 |
| SPECIFICATION |
| Power Supply |
Standard P/S2 ATX/EPS power supply unit
1. Intake airflow hole with dust filter.
2. Available for face upward and downward installation.
3. Within anti-vibration rubber. |
| Dimensions |
Main Unit: 206 x 510 x 477 mm / 8.1 x 20.1 x 18.8 inches
Box: 258 x 560 x 583 mm / 10.1 x 22.0 x 23.0 inches |
| Drive Bay |
5.25" External x 5 (One bay with 5.25" to 3.5" adapter, tool-free)
3.5" Internal x 5 (Tool-free) |
| Expansion Slot |
7 slots (tool-free) Available for max. 295mm length VGA card |
| Motherboard Support |
ATX, Micro ATX (with easy back plant installation window) |
| Cooling System |
Air-cooling
Front Fan: 120mm white LED with orange blades x 1 (Preinstalled)
(80/90/140mm fan is available)
Rear Fan: 120mm white LED with orange blades x 1 (Preinstalled)
(80/90 fan is available)
Side Fan: 80/90/120/140mm fan x 1 (optional) 120/140mm fan x 1 (optional)
Bottom Fan: 120/140mm fan x 1 (optional)
Top Fan: 120/140mm fan x 2(optional)
Fan Speed Control: Three fan speeds are adjustable synchronously by one
knob on back bracket. |
Water-cooling
Water pipe holes x 4 (with rubber cover) |
| I/O Panel |
Top Panel: Power On/Off switch and reset button
Front Panel: USB2.0 x 2, e-SATA x 1, Audio out x 1, Microphone x 1 |
|
| |
 |
 |
 |
|
 |
| 5.25" screw-less device
holder on both side. |
|
HDD tray with anti-vibration
rubber and suitable for
2.5" and 3.5" HDD. |
|
Add-on card screw-less
clips. |
| |
 |
|
 |
|
 |
| Window for CPU cooler
backplate easy
installation. |
|
Three fans synchronous
RPM controller. |
|
PSU location on the
bottom with anti-vibration
rubber. |
| |
 |
|
 |
|
 |
| PSU could be installed
downward and upward. |
|
Removable intake airflow
dust filter for PSU. |
|
Upper fan space and
preinstalled rear 12cm fan. |
| |
|
|
|
|
 |
|
 |
|
 |
| emovable intake airflow
dust filter for front fan. |
|
Bottom fan preinstalled
frame. |
|
Four water pipe holes for
future liquid cooling
system. |
|
|
| MIDGARD |
| |
 |
| MIDGARD-W |
| |
 |
| Optional Side Window Cover |
|
