UTGARD-OR / UTGARD-WD |
"UTGARD" - Beyond the world of mankind and Gods,home of Giants and Trolls. DOMINATED by LOKI, the God of Giants. Combining design and features such as coated SECC and steel mesh are spotlighting your chassis when your system is built. Furthermore this chassis is supplied with 2 x 120mm pre installed fans on the ront and the rear, one top fan with the size of 170mm, but another 6 fans can be mounted in different areas for best possible airflow. 9 x 5.25" bays will be able to house all your optical drives, an external 3,5" device adapter and a 3 to 4 HDD Device. Tool free design and a "gorgeous" outlook are only a few points why this chassis is a "must" not only for enthusiast but also for pc beginners. |
 |
| SPECIFICATION |
| Power Supply |
Standard P/S2 ATX/EPS power supply unit
1. Intake airflow hole with dust filter.
2. Available for face upward and downward installation.
3. Within anti-vibration rubber. |
| Dimensions |
Utgard-Original / Window: 207(W) x 515(H) x 490(D) mm (8.1*20.3*19.3 inches)
Utgard-Mesh: 222(W) x 515(H) x 490(D) mm (8.7*20.3*19.3 inches) |
| Drive Bay |
5.25” External x 9 with tool-free holders.
(Including one external 3.5” device adapter and one 4 in 3 3.5” HDD adapter.) |
| Expansion Slot |
7 slots (tool-free) |
| Motherboard Support |
ATX, Micro ATX (with easy black plant installation window) |
| Cooling System |
Air-cooling
Front Fan: Pre-installed 120mm white LED with orange blades x 1
(80/90/140mm fan is available)
Rear Fan: Pre-installed 120mm white LED with orange blades x 1
(80/90mm fan is available)
Side Fan: Utgard-Original: 80/90/120/140mm fan *1 (optional)
120/140mm fan *1 (optional)
Utgard-Mesh: 120mm fan *4 (optional)
200/220mm fan *1 (optional)
Utgard-Window: Not available.
Bottom Fan: 120/140mm fan x 1 (optional, with 14cm tool-free holder)
Top Fan: Pre-installed 170mm white LED with orange blades x 1
(120/140mm fan x 2 are available)
Fan Speed Control: Six fan speeds are adjustable synchronously by two
knobs on top panel. |
Water-cooling
Water pipe holes x 4 (with rubber cover)
Available for 12cm*2 or 14cm*2 radiator (thickness under 46mm) |
| I/O Panel |
Top Panel: Power On/Off switch, USB2.0 x 4, e-SATA x 2,
Audio in/out x 1 (HD Audio), two knobs of fan controller. |
|
| |
 |
 |
 |
|
 |
| 5.25" screw-less device
holder on both side. |
|
HDD tray with anti-vibration
rubber and suitable for
2.5" and 3.5" HDD. |
|
Add-on card screw-less
clips. |
| |
 |
|
 |
|
 |
| Window for CPU cooler
backplate easy
installation. |
|
Three fans synchronous
RPM controller. |
|
PSU location on the
bottom with anti-vibration
rubber. |
| |
 |
|
 |
|
 |
| PSU could be installed
downward and upward. |
|
Removable intake airflow
dust filter for PSU. |
|
Upper fan space and
preinstalled rear 12cm fan. |
| |
|
|
|
|
 |
|
 |
|
 |
| emovable intake airflow
dust filter for front fan. |
|
Bottom fan preinstalled
frame. |
|
Four water pipe holes for
future liquid cooling
system. |
|
|
| Cover-Mesh |
| |
 |
| Cover-Window |
| |
 |
| Cover-Original |
| |
 |
|
|
|
